• AMLP steps can consist of a set of up to 15,000 levels.
• Each level can be constant current, power, or resistance.^†
• Each level will be a minimum of 100 microseconds and a maximum of 15 seconds.
• Levels can be programmed in 100-microsecond increments.
• All levels in a particular AMLP step must be in charge, or all must be in discharge.
• Voltage end condition checked every 100 microseconds.
• When the voltage end condition is met, the test will branch to a user-selected step elsewhere in the test procedure.
• Record data as fast as every 100 microseconds.

^†Resistance mode is only available in discharge.

Data Collection

Program test steps that log data on multiple factors like current, voltage, time, and more! Collect data continuously at a speedy 1 kHz rate from various test channels. The first milliseconds of each data point showcase voltage and current readings at an exhilarating 20 kHz rate.

Step Length and Control

Specify test steps as short as 750 microseconds and increase them in one microsecond increments!

Set Point Lock-In Time

Lock In Setpoint in as little as 1 millisecond.

Waveforms

Stream external text test files using waveform steps, with each level customizable as constant current or power, programmable in increments as short as 1 milliseconds with a time resolution of 1 microsecond. There is no limit to the number of levels in a waveform, and multiple unique waveforms can be run in the same test.